Original JYETech DSO-SHELL DSO150 15001K DIY Digital Oscilloscope Unassembled Kit With Housing
51
Direct purchase from the factory 
Talu Diogel wedi'i Warantu
Rhodd Am Ddim
Polisi Cludo
Polisi DychwelydRhodd Am Ddim
Croeso i Roymall, eich gwefan broffesiynol ar gyfer prynu rhoddion siopau adran premium. Rydym yn gwerthfawrogi ac yn gwerthfawrogi eich cefnogaeth, ac rydym am fynegi ein diolch trwy ychwanegu cyffro ychwanegol at eich pryniadau. Pan fyddwch yn siopa gyda ni, nid yn unig y byddwch yn cael mwynhau cynnyrch o ansawdd uchel sy'n gwella eich ffordd o fyw, ond byddwch hefyd yn derbyn rhodd am ddim gyda phob archeb a wnewch. Barod i archwilio ein casgliad a dod o hyd i'ch rhoddion perffaith? Poriwch ein dewis o eitemau siop adran premium, gwneud eich archeb, ac edrych ymlaen at y cyffro o gael eich rhodd am ddim yn dod ochr yn ochr â'ch pryniad.Polisi Cludo
Byddwn yn gweithio'n galed i gyflwyno eitemau atoch ar ôl derbyn eich archebion a sicrhau eu bod yn cyrraedd yn ddiogel. Bydd manylion cludo yn cael eu darparu yn eich e-bost cadarnhau.Yn y rhan fwyaf o achosion, mae archebion yn cael eu prosesu o fewn 2 ddiwrnod.O dan amgylchiadau arbennig, bydd yn cael ei oedi fel a ganlyn: Pan fyddwch yn gwneud archeb ar ddydd Sadwrn, dydd Sul neu wyliau cyhoeddus, bydd yn cael ei oedi am 2 ddiwrnod..Yn nodweddiadol, mae angen 5-7 diwrnod gwaith (dydd Llun i ddydd Gwener) heb gael eu heffeithio gan oedi hedfan neu ffactorau amgylcheddol eraill..Gan fod ein gwasanaeth cludo yn fyd-eang, bydd yr amseroedd cludo yn dibynnu ar eich lleoliad, felly gall gymryd ychydig o amser ac, os gwelwch yn dda, aros yn amyneddgar os ydych yn ardaloedd neu wledydd anghysbell.1. Polisi Dychwelyd a Chyfnewid
Dim ond eitemau a brynwyd ar roymall.com y byddwn yn eu derbyn. Os ydych yn prynu gan ein dosbarthwyr lleol neu fanwerthwyr eraill, ni allwch eu dychwelyd atom ni. Ni fydd eitemau gwerthu terfynol neu roddion am ddim yn cael eu derbyn ar gyfer dychwelyd. I fod yn gymwys i'w dychwelyd, rhaid i'ch eitem fod yn heb ei defnyddio ac yn yr un cyflwr ag yr oedd pan gawsoch hi. Rhaid iddi hefyd fod yn y pecyn gwreiddiol.Ar ôl derbyn cyfarwyddiadau dychwelyd gennym, os gwelwch yn dda, pecynwch eich eitemau a ddychwelwyd a gollwng eich pecyn yn y swyddfa bost leol neu gludwr arall.Byddwn yn prosesu'ch eitem a ddychwelwyd neu a gyfnewidir o fewn 3-5 diwrnod gwaith ar ôl iddo gyrraedd. Bydd yr ad-daliad yn cael ei brosesu a'i gredyd yn awtomatig i'ch dull talu gwreiddiol.Ni ellir derbyn dychweliadau na chyfnewidiadau os cafodd y cynnyrch ei gynhyrchu'n bersonol, gan gynnwys maint wedi'i gyfaddasu, lliw wedi'i gyfaddasu neu argraff wedi'i gyfaddasu.Angen mwy o help, os gwelwch yn dda, cysylltwch â ni. service@roymall.com neu Whatsapp: +8619359849471
2.Polisi Ad-dalu
Byddwch yn cael ad-daliad llawn neu gredyd siop 100% ar ôl i ni dderbyn y pecyn a ddychwelwyd a'i wirio. Bydd yr ad-daliad yn cael ei brosesu a'i gredyd yn awtomatig i'ch dull talu gwreiddiol. Sylwch nad yw costau cludo ac unrhyw drethi neu ffi yn cael eu had-dalu. Nid yw'r costau cludo ychwanegol yn cael eu had-dalu ar ôl i'r pecyn gael ei anfon. Rydych chi'n gyfrifol am dalu'r ffioedd hyn, ac ni allwn eu hosgoi na'u had-dalu, hyd yn oed os yw'r archeb yn cael ei dychwelyd atom ni.Ar ôl derbyn a chadarnhau'ch eitem a ddychwelwyd, byddwn yn anfon e-bost atoch i'ch hysbysu ein bod wedi derbyn eich eitem a ddychwelwyd. Byddwn hefyd yn eich hysbysu am gymeradwyo neu wrthod eich ad-daliad.Os oes gennych unrhyw broblemau ynghylch y broses ad-dalu, os gwelwch yn dda, cysylltwch â ni. service@roymall.com neu Whatsapp: +8619359849471
DSO Shell (DSO150) Oscilloscope DIY Kit:
1. DSO Shell has similar bandwitch as DSO138 though it contains significant improvements in structure, mechanical, and operation.
2. Display and MCU are now mounted on the same board (mainboard) to avoid using inter-board pin-headers. Feedback from DSO138 usres have shown that soldering on the pin-headers are often problematic for many beginners. Analog channel is placed on a separated board which contains most user install parts. This brings in better separation between analog and digital circuits. Without the analog portion the mainboard is actually a general purpose control board that can be used in many other applications. The mainboard is fully installed (except a few through-hold components) and factory tested before packing.
3. DSO Shell comes with full enclosure. The front panel and top/bottom brackets are flexiable for easy user modification.
4. Rotary encoder has been added. It makes parameter adjustment much quicker and easier.
5. The sensitivity of DSO Shell has been extended in both directions and is higher and wider than DSO138. It reaches 5mV/div --- 20V/div while DSO138 is only 10mV/div --- 5V/div.
6. DSO Shell runs on 9V (do not use power voltage higher than 10V!) power supply. Users need to prepare their own power supply since it is not included in the kits. The power jack on the mainboard accepts standare 5.5mm/2.1mm DC plug. Alternative 2-pin connector (0.1" pitch) is also provided for convenience to connect to different power sources.
Important Notes:
It is assumed that users have adaquate soldering skills and troubleshooting skills to assemble the DSO Shell kits. Buyers are advised that due to skills of user is involved in assembly it is not guaranteed every kit will end up being a working device. But we will make as much efforts as we can to approach that goal.
After receiving the kits users are urged to check mainboard and LCD by applying proper power supply. Report immediately to us or JYE Tech if problem or damage is found.
Characteristics of indicators:
Number of channel: 1
Analog bandwidth: 0 - 200KHz
Sensitivity: 5mV/Div - 20V/Div
Sensitivity error: < 5%
Resolution: 12-bit
Input Impedance: 1M ohm
Maximum input voltage: 50Vpk
Coupling: DC, AC, GND
Max real-time sampling rate: 1Msps
Timebase: 10us/Div - 500s/Div
Record length: 1024
Trigger modes: Auto, Normal, Single
Trigger types: Rising/falling edge
Trigger position: 1/2 of buffer size fixed
2.4-inch color TFT LCD with 320 x 240 resolution
Power supply: 9V DC (please make sure the power supply is 9V, lower or higher than 9V will cause problems.)
Supply current: 120mA @ 9V
Dimension: 115mm x 75mm x 22mm
Weight: 100 gram (not including cables and power supply)
Update informations: Component accessories and PCB board made a number of changes
Firmwares: Click to open
Users Manual: Click to open
Mainboard Schematic: Click to open
Analog board Schematic: Click to open
How to Use the DSO150 Library: Click to open
Source codes: Click to open
FAQ, Tips, and Troubleshooting: Click to open
Package includes:
1 x DIY DSO150 Digital Oscilloscope Kit (There may be a color difference)
1 x EN Instruction
1. DSO Shell has similar bandwitch as DSO138 though it contains significant improvements in structure, mechanical, and operation.
2. Display and MCU are now mounted on the same board (mainboard) to avoid using inter-board pin-headers. Feedback from DSO138 usres have shown that soldering on the pin-headers are often problematic for many beginners. Analog channel is placed on a separated board which contains most user install parts. This brings in better separation between analog and digital circuits. Without the analog portion the mainboard is actually a general purpose control board that can be used in many other applications. The mainboard is fully installed (except a few through-hold components) and factory tested before packing.
3. DSO Shell comes with full enclosure. The front panel and top/bottom brackets are flexiable for easy user modification.
4. Rotary encoder has been added. It makes parameter adjustment much quicker and easier.
5. The sensitivity of DSO Shell has been extended in both directions and is higher and wider than DSO138. It reaches 5mV/div --- 20V/div while DSO138 is only 10mV/div --- 5V/div.
6. DSO Shell runs on 9V (do not use power voltage higher than 10V!) power supply. Users need to prepare their own power supply since it is not included in the kits. The power jack on the mainboard accepts standare 5.5mm/2.1mm DC plug. Alternative 2-pin connector (0.1" pitch) is also provided for convenience to connect to different power sources.
Important Notes:
It is assumed that users have adaquate soldering skills and troubleshooting skills to assemble the DSO Shell kits. Buyers are advised that due to skills of user is involved in assembly it is not guaranteed every kit will end up being a working device. But we will make as much efforts as we can to approach that goal.
After receiving the kits users are urged to check mainboard and LCD by applying proper power supply. Report immediately to us or JYE Tech if problem or damage is found.
Characteristics of indicators:
Number of channel: 1
Analog bandwidth: 0 - 200KHz
Sensitivity: 5mV/Div - 20V/Div
Sensitivity error: < 5%
Resolution: 12-bit
Input Impedance: 1M ohm
Maximum input voltage: 50Vpk
Coupling: DC, AC, GND
Max real-time sampling rate: 1Msps
Timebase: 10us/Div - 500s/Div
Record length: 1024
Trigger modes: Auto, Normal, Single
Trigger types: Rising/falling edge
Trigger position: 1/2 of buffer size fixed
2.4-inch color TFT LCD with 320 x 240 resolution
Power supply: 9V DC (please make sure the power supply is 9V, lower or higher than 9V will cause problems.)
Supply current: 120mA @ 9V
Dimension: 115mm x 75mm x 22mm
Weight: 100 gram (not including cables and power supply)
Update informations: Component accessories and PCB board made a number of changes
Firmwares: Click to open
Users Manual: Click to open
Mainboard Schematic: Click to open
Analog board Schematic: Click to open
How to Use the DSO150 Library: Click to open
Source codes: Click to open
FAQ, Tips, and Troubleshooting: Click to open
Package includes:
1 x DIY DSO150 Digital Oscilloscope Kit (There may be a color difference)
1 x EN Instruction
Products related to this item
Loading related products...
❮
❯
Videos for similar product
Loading product videos...
❮
❯
Electronics Ranking
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
